University Wide Migration from Duo to Microsoft Authenticator: Guidance for Extension staff
If You Have Not Switched Yet
Extension IT recommends continuing to use Duo until campus’s guided enrollment campaign prompts you to switch. The campaign will walk you through the setup process step by step.
You can preview the university’s migration prompt and instructions so you know what to expect.
When the enrollment prompt appears during your normal sign-in to a university service, follow its instructions and complete enrollment before any deadline displayed. If you are unsure whether a prompt is legitimate or need help completing setup, contact Extension IT.
I Already Switched, but Now I Am Being Asked to Scan a QR Code EVERYTIME!
If you are asked to scan a QR code each time you sign in on your computer, you are likely using a passkey stored on your phone. This is a supported sign-in method and does not necessarily mean anything was configured incorrectly.
Microsoft Authenticator supports both of the following methods:
- Passkey stored on your phone: When signing in on a computer, you may scan a QR code with your phone and confirm using your face, fingerprint, or phone PIN.
- Authenticator notification: You receive a request in the app, enter the number displayed on your computer, and confirm.
Phone passkeys provide phishing-resistant sign-in, but using one on a computer can involve additional steps. If your current setup works and you prefer using it, you can continue doing so.
If you would prefer to receive a push notification instead of scanning a QR code, follow the instructions in the next section.
How to Receive a Push Notification Instead of Scanning a QR Code
Follow these steps to check your registered methods, set up Authenticator notifications, test them, remove Duo from your Microsoft sign-in methods, and remove your phone passkey if desired.
Have your computer and phone available, and make sure your phone has an internet connection.
Successfully test Authenticator notifications before removing Duo or your phone passkey from your Microsoft sign-in methods. Keep your current working methods until testing is complete. You do not need to uninstall Microsoft Authenticator or delete your university account from the app.
Select each step below to expand its instructions.
Step 1: Check Your Registered Sign-In Methods
- On your computer, open Microsoft Security info.
- Sign in with your NetID@illinois.edu account. Complete verification using a method that currently works.
- Review your registered methods. Look for a separate Microsoft Authenticator entry. A Passkey entry alone does not confirm that notifications are registered.
If Microsoft Authenticator is listed, continue to Step 3: Test Authenticator Notifications.

If it is missing and your only options are Password and Duo (external mfa), complete Step 2 first.
Step 2: Set Up Authenticator Notifications
- On the Security info page, select Add sign-in method.

- Choose Microsoft Authenticator. For notification setup, select this option rather than Passkey in Microsoft Authenticator.

- Follow the prompts on your computer until a setup QR code appears.


- On your phone, open Microsoft Authenticator.
- Select + or Add account, then choose Work or school account.
- Select Scan a QR code and scan the setup code displayed on your computer. Allow camera access if prompted.

- Allow notifications if prompted.
- Select Next on your computer to send a test request.

- Open the request in Authenticator, enter the number displayed on your computer, and confirm. Complete your phone’s security check if prompted.
- Continue until the success message appears, then select Done.

The QR code in this step is used to register the app for notifications. Scanning it alone does not finish registration. Complete the test request and confirmation screens before continuing.
If Microsoft Authenticator is already registered but notifications do not work, contact Extension IT before deleting or recreating the registration.
Step 3: Test Authenticator Notifications
- Keep Security info open. Open a separate private or incognito browser window and go to a university service you normally use.
- Begin signing in with your university account with your email and password.
- If a passkey or QR code window appears, cancel that window to return to the Microsoft sign-in page.

- You should be redirected to a screen to Verify Your Identity screen. Select Approve a request on my Microsoft Authenticator app or the equivalent notification option.

- Open the notification on your phone, enter the number displayed on your computer, and confirm.
- Your phone may still ask for Face ID, a fingerprint, or its unlock PIN. This is an expected security check when approving a notification.
- Sign in should be completed at this point.
If the notification option is missing or the test fails, contact Extension IT before removing any sign-in methods.
Step 4: Remove Duo from Your Microsoft Sign-In Methods
After successfully testing Microsoft Authenticator notifications, we recommend removing Duo (external mfa) from your Microsoft sign-in methods so Microsoft Authenticator becomes the default option when signing in.
- Return to Microsoft Security info.
- Locate Duo (external mfa).
- Select Delete beside that entry and confirm the removal.

- Open a new private or incognito browser window and sign in to a university service to confirm Microsoft Authenticator notifications work.
Keep the Microsoft Authenticator entry.
Wait—don’t delete the Duo app just yet! Keep Duo Mobile installed and keep your university account in the app. Some campus services, including the NetID Center used to reset your password, still require Duo. Deleting the app or its university account could leave you unable to access those services.
If Microsoft Authenticator does not work during testing, contact Extension IT before removing Duo from your Microsoft sign-in methods.
Step 5: Remove the Phone Passkey If Desired
Removing the passkey is optional. Complete this step only if notifications have been tested successfully and you would prefer to stop using the phone passkey.
- Return to Microsoft Security info.
- Find the Passkey entry associated with your phone. Its name may include your phone’s name or Microsoft Authenticator.
- Select Delete beside that passkey and confirm. Keep the separate Microsoft Authenticator entry.
- If the passkey was stored in Microsoft Authenticator, open the app on your phone and select your University of Illinois account.

- Click Passkey
- select the Trash Can Icon in the upper right corner.
- Click Delete to confirm the deletion of the passkey. Keep the university account in the app.
- Your University Account should now no longer show a Passkey option at the top, but an option below to Create A Passkey.
If the passkey was stored in another provider, such as Apple Passwords or Google Password Manager, remove its saved copy there instead. If you cannot identify the correct passkey, contact Extension IT before deleting anything.
Campus also recommends registering a second supported authentication method as a backup if your phone is lost, replaced, or unavailable.
What to Expect Afterward
When using Microsoft MFA Authenticator, you will generally:
- Enter your university username and password.
- Receive a request in Microsoft Authenticator on your phone.
- Enter the number displayed on your computer into the app.
- Confirm using your phone’s security check, if prompted.
Need Assistance?
Contact the Extension IT Help Desk. Be sure tell us which screen appears, whether you use an iPhone or Android phone, and whether another sign-in method still works.
Do not send passwords, verification codes, or setup QR codes. Only approve sign-in requests you initiated.