ClassTech, Mersive Solstice Wireless Presentation

Instructions for using Mersive Solstice wireless presentation devices in the classrooms.

The Mersive Solstice allows you to wirelessly present your screen from a laptop or tablet to the classroom's projector. We run version 5.4+ on the pods, so all devices must also be running version 5.4+ of the app to present. Check the About Solstice page for OS requirements.

Mersive Solstice Video Guide

Important Notes

  • Please remember to disconnect from the Mersive Pod when you are done presenting. If a previous user has not disconnected from the pod, please call the IT Service Desk at 217-244-7000, and ask for a Tier 2 staff member to disconnect any previous users.
  • Airplay can take up to 3 (three) minutes to load the device(s) for connecting.
  • Videos shared from your device will have visible lag. This is a known issue and we recommended using a wired connection (HDMI) when streaming video to the projector.
  • You cannot cast audio from Android devices at this time. We are currently awaiting a fix from Google but do not have a timeframe for the resolution.
  • Linux is not supported at this time.

Connecting

macOS

  1. Ensure that you are connected to the IllinoisNet Wi-Fi network. IllinoisNet_Guest or Eduroam will not work.
  2. Press the Wireless button on the classroom control panel.
  3. Click the Settings widget next to the clock in the upper-right corner.

    The settings widget

  4. Click the Screen Mirroring icon.

    The screen mirroring icon of two overlapping screens.

  5. Click on the name of the Mersive Solstice device you want to present to. It should be named after the building and room number that you're located in.

    A list of available AirPlay devices, all named after buildings and room numbers

  6. A pairing code should appear on the screen within the classroom. Enter the pairing code into the AirPlay prompt.

    AirPlay asking for a 4-digit code to be entered

iOS (iPhone/iPad)

  1. Ensure that you are connected to the IllinoisNet Wi-Fi network. IllinoisNet_Guest or Eduroam will not work.
  2. Press the Wireless button on the classroom control panel.
  3. Swipe down from the top right of your screen to access the iOS Control Center.
  4. Press the Screen Mirroring icon.

    The AirPlay button highlighted in the iOS Control Center

  5. Press on the name of the Mersive Solstice device you want to present to. It should be named after the building and room number that you're located in.

    iOS showing a list of available AirPlay devices

  6. A pairing code should appear on the screen within the classroom. Enter the pairing code into the AirPlay prompt.

    iOS asking for a 4 digit pairing code to be entered

When you are done sharing your screen, make sure to disconnect from the display by clicking on the AirPlay icon again and clicking disconnect.

Note: Mac users can also download the Mersive Solstice App and follow the directions in the Windows section.

Windows

  1. Ensure that you are connected to the IllinoisNet Wi-Fi network. IllinoisNet_Guest or Eduroam will not work.
  2. Press the Wireless button on the classroom control panel.
  3. On your computer, open the Solstice Client program.
    • If you do not have the Solstice Client installed on your computer, enter the IP address that is displayed on the projector screen into the address bar of your web browser. Downloads are also available on the Mersive Website.
    • Next, click Get the App & Join. Once downloaded, install and launch the program.
      Solstice desktop icon
      Solstice Client desktop icon
  4. Select the room you are in from the list.
    • NOTE: It may take up to a minute for the device to be discovered.
    • You can also use the search bar to look for the building and room.

      Discovered displays

  5. If the room you are in is not listed then type the IP address displayed on the projector screen into the search box that says "Enter Screen Key to Connect". You can also Open the Mersive Solstice App and select: Settings > General > Solstice Discovery Service Address and enter solsticesdsprod.virtual.illinois.edu.
    IP and key locations
    Left arrow shows pairing key location, right arrow shows IP address location.
  6. Next, enter the 4-digit key into the popup. The key will be displayed on the projector screen.

    Enter key

  7. Choose what you would like to share under "Share something:"

    Share something screenshot

  8. When you are done sharing your screen, make sure to click Disconnect in the top right corner of the Solstice window.

Android

  1. Ensure that you are connected to the IllinoisNet Wi-Fi network. IllinoisNet_Guest or Eduroam will not work.
  2. Press the Wireless button on the classroom control panel.
  3. Download the Solstice Mirror app from the Google Play Store.

    Solstice Mirror app logo

  4. Enter the IP address of the Solstice device, seen in the top right corner of the screen, and click connect

    Solstice Mirror app asking for an IP address

  5. Enter the 4-digit key into the popup. The key will be displayed on the projector screen.

    Solstice Mirror app asking for a 4 digit pairing code

  6. You are now connected to the Solstice device in the classroom! Press the Mirror Screen button to present your screen on the projector.

    Successfully connected to the Mersive Solstice device with the Mirror screen button in the middle

  7. When you are done sharing your screen, make sure to disconnect from the display by clicking the red disconnect at the bottom of the screen.

If you have any questions or need troubleshooting assistance, please contact the IT Service Desk by phone at 217-244-700, by email at consult@illinois.edu, or by submitting a ticket.


Keywords:
classroom technology, audiovisual, AV, projector, CCME, wireless presentation, kramer via, apple TV 
Doc ID:
81434
Owned by:
Class Tech G. in University of Illinois Technology Services
Created:
2018-04-05
Updated:
2026-04-15
Sites:
University of Illinois Technology Services